Top Soil in Dallas, TX
Connecting people who have dirt with people who need dirt.
Connecting people who have dirt with people who need dirt.
Grading contractors, excavators, developers, and haulers working in Dallas can post surplus topsoil from active job sites or source material from nearby projects, cutting haul distance and keeping usable soil out of landfills. Property owners needing topsoil for lawn repair, raised beds, or yard regrading can connect with local suppliers through the same marketplace, often at a lower delivered cost than ordering through a retail yard. Browse the live listings, map, and current availability shown directly below.
4 listings near Dallas, TX
1 listing near Dallas, TX
The largest variable cost in moving topsoil is haul distance. Fuel, driver hours, and truck wear all scale with miles, so matching a surplus site to a nearby receiving site directly reduces what a hauler or contractor spends per yard moved. A grading crew finishing a Dallas site with leftover screened topsoil can post that material and get paid to move it rather than paying tipping fees to dispose of it.
Keeping material local also means fewer empty return trips and fewer loads going to landfill. For excavators and haulers operating across the DFW area, that margin difference compounds across multiple jobs. Contractors can post available material as soon as a job is awarded, giving buyers lead time to plan deliveries and schedule equipment.
Excavated topsoil swells roughly 20 to 30 percent when loose, which means a bank cubic yard and a truck cubic yard are not the same number. Contractors ordering trucks or quoting a job must convert between bank measure, loose measure, and compacted measure to avoid under-ordering or overloading equipment. Homeowners and project managers should ask any supplier whether a quoted volume is bank, loose, or compacted before confirming an order.
Dallas haulers typically deliver topsoil by the cubic yard or by the truckload. A standard tandem-axle dump truck carries roughly 10 to 14 cubic yards per load. Most suppliers set minimum delivery thresholds, so smaller residential orders may carry a premium per yard. Confirming load size, minimum quantities, and whether the material has been screened before booking avoids surprises on delivery day.
Clean fill is soil free of organics, debris, and contaminants. It is appropriate for raising grade in non-load-bearing areas such as lawn leveling, landscaping beds, and drainage corrections. Topsoil with organic content goes a step further and supports plant establishment, so buyers sourcing material for planting areas should confirm organic matter is present and that the material has been screened for roots, rocks, and debris.
Structural or select fill is a different product with a different purpose. It is placed in compacted lifts and typically requires compaction testing to a specified percentage of maximum dry density. In Texas, select fill is commonly an imported clay-sand blend chosen for predictable compaction under building pads, slabs, and pavements. Local specifications vary by project and jurisdiction, so contractors should confirm required gradation with the project engineer before sourcing material rather than assuming any available topsoil will qualify.
Much of north Texas, including the Dallas area, sits on expansive clay that swells when wet and shrinks when dry. This soil movement makes native material unreliable for lawn establishment, landscaping beds, and foundation preparation. Because native clay is not suitable for planting or for predictable compaction in many applications, imported topsoil and select fill are in steady demand across Dallas residential and commercial sites.
Expansive clay movement is a frequent driver of foundation design decisions in the area. A geotechnical professional typically evaluates site conditions before construction begins to determine what fill type and placement method are appropriate. Caliche, a naturally cemented calcium carbonate layer found across central Texas, can also raise excavation costs when it must be removed from a site; its suitability for any specific use is generally confirmed by testing.
The Texas Commission on Environmental Quality regulates fill placement near waterways, and many Texas counties require imported fill to be free of construction debris. Buyers and sellers transacting through any marketplace, including DirtMatch, should confirm material quality and any applicable local requirements before completing a transfer.
Dallas homeowners use topsoil for a range of common projects: lawn repair and overseeding prep typically calls for 2 to 4 inches of material spread across the target area; raised garden beds generally need 6 to 12 inches of screened topsoil; low-spot filling and yard regrading to direct drainage away from a foundation may require anywhere from a few yards to several truckloads depending on the lot size and grade change needed.
A typical residential project in Dallas runs from 5 to 30 cubic yards. Smaller quantities often cost more per yard because most suppliers set minimum delivery fees, so the per-yard cost on a 3-yard order can be significantly higher than on a 15-yard order. Grouping orders with a neighbor, timing a purchase to coincide with a contractor's nearby surplus, or sourcing through a local marketplace can reduce per-yard cost on smaller jobs.
When evaluating any topsoil offer, homeowners should ask whether the material has been screened for debris, roots, and rocks. Material described only as fill dirt may lack the organic content needed for planting areas. Asking for a visual inspection or a small sample before committing to a full delivery is a reasonable step, especially when sourcing from a private seller or surplus site.
Most Dallas haulers deliver topsoil by the cubic yard or by the truckload using tandem-axle dump trucks that carry roughly 10 to 14 cubic yards per load. Confirm the load size, minimum delivery quantity, and whether the material has been screened before booking. Some suppliers charge a flat delivery fee regardless of volume, which raises the per-yard cost on small orders. Asking about lead time and whether the driver can place material in a specific location on your property avoids surprises on delivery day.
Matching a site that has surplus topsoil with a nearby site that needs it cuts round-trip haul distance, which is the largest variable cost in moving material. Shorter hauls reduce fuel, driver hours, and truck wear. For contractors, posting available material from a grading or excavation job turns a potential disposal cost into revenue and eliminates tipping fees. Haulers benefit from fewer empty return trips when loads are matched locally.
It depends on what you are building. Clean fill, meaning soil free of organics and debris, works for raising grade in non-load-bearing areas like yard leveling or landscaping beds. Topsoil with organic content is the right choice for planting, lawn repair, and raised beds. Structural or select fill is a different product: it is placed in compacted lifts and typically requires compaction testing to a specified density percentage. In Texas, select fill under foundations and slabs is commonly an imported clay-sand blend; confirm the required gradation with your project engineer before sourcing material.
The most direct way to reduce delivered cost is to source from a nearby surplus site rather than a distant retail yard. A local marketplace lets you browse available topsoil from excavation and grading projects happening close to your property, which cuts haul distance and delivery fees. Grouping your order with a neighbor to meet a supplier's minimum quantity threshold also lowers per-yard cost. Always confirm the material has been screened for debris and roots before agreeing to a price.
Create a free listing on DirtMatch describing whether you have topsoil available or need it, the approximate volume in cubic yards, the material type (screened topsoil, clean fill, or other), your general location in the Dallas area, and any access or equipment requirements. Contractors can post available material as soon as a job is awarded to give buyers lead time. Homeowners can post a wanted listing to receive offers from local suppliers and haulers. The more detail you include about material condition and quantity, the faster you will get a useful response.
Most of the Dallas area sits on expansive clay that swells when wet and shrinks when dry. This movement makes native soil unreliable for lawn establishment, garden beds, and landscaping. Native clay also drains poorly and compacts in ways that limit root growth. Imported topsoil, typically a screened blend with organic matter, provides a stable growing medium that native clay cannot. The same expansive clay behavior is also a frequent reason foundation preparation in the area requires imported select fill rather than native material.
A typical Dallas residential topsoil project runs from 5 to 30 cubic yards depending on the scope. Lawn repair and overseeding prep generally calls for 2 to 4 inches of material spread across the area; raised garden beds need 6 to 12 inches. Smaller orders often cost more per yard because most suppliers charge minimum delivery fees. To estimate volume, multiply the area in square feet by the depth in feet and divide by 27 to get cubic yards. Confirm with your supplier whether the quoted volume is loose or bank measure, since excavated soil swells roughly 20 to 30 percent when loose.
Ask the seller whether the material has been screened for rocks, roots, and construction debris. Request a visual inspection or a small sample before committing to a full delivery. Material described only as fill dirt may lack the organic content needed for planting. Avoid accepting material that smells of petroleum, contains visible concrete chunks, asphalt, or treated wood, or comes from a site with an unknown use history. The Texas Commission on Environmental Quality regulates fill placement near waterways, and many Texas counties require imported fill to be free of construction debris, so confirming material quality protects both buyer and seller in any transaction.
Dallas homeowners most commonly use topsoil for lawn repair and overseeding prep (spreading 2 to 4 inches across bare or damaged areas), raised garden and vegetable beds (6 to 12 inches of screened material), filling low spots that collect standing water, and regrading yards to direct drainage away from the foundation. Foundation drainage correction is especially common in Dallas given the expansive clay native soil, which can shift and create low spots over time. For any planting use, confirm the topsoil contains organic matter and has been screened for debris.
Expansive clay across the Dallas area swells when wet and shrinks when dry, which creates unpredictable volume changes that complicate grading work. Native clay is generally not suitable as select fill under foundations or slabs without engineering review. Contractors typically import a clay-sand blend as select fill, placed in compacted lifts and tested for density. A geotechnical professional usually evaluates site conditions before construction to specify the required fill type and compaction target. When caliche is present, its hardness can raise excavation costs and its suitability for reuse must be confirmed by testing. Sourcing the right imported material locally through a marketplace reduces haul cost compared to pulling from a distant supplier.